From prototyping to highly complex aircraft modification, SES is able to meet the high standards for both Government and commercial customers. SES offers systems integration, repair and overhaul, and maintenance services for business and commercial aviation.
SES was awarded a competitive Indefinite Delivery Indefinite Quantity (IDIQ) Contract in August 2007 to serve as the Prime Contractor in support of the Logistics Support Facility Management Activity (LSFMA), Redstone Arsenal I Huntsville, Alabama.
The LSFMA is a government owned, commercially operated IDIQ contractual vehicle allowing for rapid response to meet customer needs. The primary focus of the LSFMA is to provide Army Aviation and other DoD/Federal customers with a rapid acquisition, rapid response entity to provide warfighter capability in the most cost effective, rapid response environment. Through the LSFMA, SES is able to provide a full spectrum of repair, modification and integration of aviation, ground vehicle and maritime systems and sub-systems to including logistics, technical, systems engineering, design and training support services.
Our performance drives our success. We do high-quality work cost effectively and we’re committed to doing what it takes to return aircraft to the warfighter on time. The LSFMA provides both government and commercial aviation Program Management Office (PMO) personnel with a quick reaction, low-cost, full aircraft modification capability. This IDIQ contract vehicle establishes an in-place, broad-scope contract for quick reaction contracting capability. The IDIQ provides for Firm Fixed Price, Cost Plus Fixed Fee, or Time and Material orders to suit the specific needs of our customer. For more information about utilizing the LSFMA contract, please contact Mr. Skip Sherrell, Business Development Vice President, or George Kunkel, SES General Manager, LSF, at (256) 258-0500 or firstname.lastname@example.org.
SES provides mobile and on-station training using interactive multimedia instruction and computer-based training for aviation warfighters with just-in-time aviation training that is relevant instruction as required any time and anywhere to all branches of services and foreign military sales.
SES has been conducting integration, storage, repair, and training of unmanned systems for over a decade. With over a one million SF integration facility, SES has the space required to handle a myriad of UAS requirements under one roof. Some of the various unmanned programs executed by SES are listed below: Shadow RQ-7 Communications Relay; Shadow RQ-7 Infra-Red Strobe Lights; Trade Study, development and integration of the Shadow Block III Replacement Engine (Heavy Fuel Engine); Small UAS Logistics Trainers (Wasp, Raven, Puma, OSRVT); VAMPIRE Institutional Training Device (Wasp, Raven, Puma); SUAS Inventory Control Point (ICP); Army UAS Catalog Ordering Logistics Tracking System (COLTS); AH-64 Manned Unmanned Teaming 2nd Gen (MUMT-2); AH-64D Manned Unmanned Teaming 3rd Gen (MUMT-X & FMS; and Ground Based Sense and Avoid (GBSAA) Fielding / NETT.
Delivering high-quality products – often ahead of schedule – and at significant cost savings, SES has won various DoD and commercial contracts for the manufacture of components, subsystems or entire system integration projects. Our manufacturing efforts frequently involve working closely with Government agencies and utilizing multiple subcontractors and vendors. The broad spectrum of products we manufacture are used in applications ranging from equipping soldiers in the field to enhancing homeland security efforts to environmental protection.
SES specializes in research and development of unique and versatile LIDARs, tunable solid state lasers, mass spectrometers, Small UAS, and electro-optic sensor systems.
SES’ R&D Center is located in Columbia, MD, has a full suite of capabilities and laboratories for laser, lidar, mass spectrometry, and electro-optical instrument research and development. SES has developed diagnostic equipment for its LIDAR programs allowing extensive laboratory testing to ensure system performance before field testing. These include measurements of alignment, optical efficiency, noise, beam shape, and spectral distribution. SES has the facilities and expertise to safely mimic a variety of test sites and conditions as well as several simulants and interferants.
The SES patent portfolio contains over a dozen patents including ion-traps for mass spectrometers, MALDI, aerosol lidar optical architectures, and tunable lasers. Earlier, SES received the Tibbitts Presidential Award for the most Small Business Innovation Research (SBIR) programs/projects. Following is a sampling of our technologies portfolio along with several pictures:
SES has an established team of technology experts that includes the requisite engineering expertise to support mechanical and electronic prototype hardware design, analysis, testing, and documentation at the component, sub-system, and system level. Via in-house organic capabilities and in partnership with our U.S. Army Prototype Integration Facility partners, SES has areas of expertise in the following areas:
SES provides our customers with a diversified staff of engineering talent that can work hand-in-hand with the customer to develop concepts and designs for new systems or upgrades to existing systems. Our SES R&D Center engineering staff in conjunction with our SES Huntsville Operations technical staff and our vast strategic partnerships offer a highly skilled capability in all types of hardware development, specializing in mechanical, electronic, and structural design.
One prime example of prototyping includes the successful transition of the Armed 407 development program to a full rate production capability and delivery. The Armed 407 Program is one such example of the type of prototyping and production experience inherent within SES.
Leading the charge in our commitment to serve you is your SES Program Manager (PM) assigned to your project. Your SES PM provides seamless transition throughout the project/program life-cycle, fosters open communication, on-time delivery, ensures exceptional quality and competitive prices.
Our Program Managers have varying backgrounds and experiences that offer a broad range of perspectives to the organization, allowing us to match you to the Program Manager best suited to you and your program’s needs. SES has established a strong, dedicated and experienced Program Management team with emphasis/training utilizing the DoD Acquisition Framework for Program Management. Our Program Management Team, with a heavy focus on U.S. Army Aviation programs, provides your program/project a proven professional including DoD certified acquisition professionals with over 200 years combined experience supporting DoD acquisition programs.
Your entire customer experience is directed by our Program Managers. Once a requirement is identified, SES assigns a highly professional Program Manager (PM) to serve as the lead for your program. Our proven processes and automated systems support preparation of rough order of magnitude (ROM) estimates, manufacturing estimates, and quotes, as well as full volume proposals. After initiation of project, the PM provides overall cost, schedule and performance tracking in order to provide you with up to date estimates, schedules, current program status and other pertinent data that results in a high-quality product or service delivered on or ahead of schedule.
SES Program Managers take pride in their ability to communicate efficiently and effectively between you and our workforce. This is the cornerstone to effective program management.
Our Program Managers will:
SES’s Quality System is more than just a certificate on the wall, it is an integral piece of everything we do. SES’s Quality Management System is certified as being in conformity to ISO 9001:2015, AS9100:2016, and AS9110:2016 by Intertek. ISO 9001:2015 represents a model for Quality Assurance in Design, Development, Production, Installation and Servicing. AS9100 and AS9110 represent well-defined Aerospace Quality Systems requirements for the design, manufacture, maintenance, repair, alteration, overhaul and system integration of aircraft, assemblies, subassemblies, and components for Department of Defense, Aerospace, and commercial applications. Furthermore, SES is FAA Part 145 Certified (Bell 206, 407 & BK117) and has on-site DCMA Oversight. SES Flight, Ground and Safety Operations were evaluated by DCMA and received Green, low risk ratings in all areas. SES earned the following recognitions from DCMA for our systems: DCMA Approved Purchasing System, DCMA Approved Property Management System and SES was recognized as a DCMA Green Low Risk Company.
Our warfighters require and deserve the highest quality weapon system hardware — their lives depend on it. SES has developed, documented and implemented Aerospace compliant procedures that cover all aspects of the operation. These processes are audited for compliance and effectiveness as part of our robust internal audit process, our Customer/Second Party Audits – performed by DCMA, Boeing, & Sikorsky, and our Third Party Audits – performed by Intertek on a semiannual basis.
At SES, quality is built into the product, not inspected into the product. All employees have primary responsibility to assure parts "meet the Customers' stated and implied requirements." Inspection stations are strategically placed throughout the shop for in-process inspection by the employees manufacturing the parts. SES has a comprehensive line of inspection, measuring and test equipment. Records are kept providing traceability of inspection equipment to each program/job. Calibration procedures are maintained for all inspection equipment.
As a small business, SES prides itself on attracting and retaining the industry’s top technology experts. SES is primarily focused on two areas: 1) research and development (SES R&D Center), as it applies to bio-chemical, laser/optics, aviation, missile and other DoD weapon system hardware; and 2) weapon system manufacturing and integration.
SES’ engineering talent and resources provide a unique and creative team focused on the engineering disciplines optimized for total weapon system life cycle sustainment. Success is realized through organic in-house engineering and technical capabilities and unprecedented Government/Industry partnerships.
SES offers the full spectrum of engineering and technical expertise to support your requirement.
SES is currently executing in excess of $2 Billion in DoD/Government contracts. In addition to several specific weapon system hardware production active contracts, SES is serving as the prime contractor or joint venture partner to two omnibus type contracts that offer broad scope and environment that offers rapid response.
Prototype Integration Facility (PIF)
Redstone Defense System (RDS), a SBA 8a approved joint venture between Yulista Aviation, Inc. and SES, LLC., was awarded a contract from the PIF. SES is currently a joint venture partner and Prime Contractor in support of the U.S. Army Prototype Integration Facility (PIF). The point of contact is Mr. Julio Driggs (256) 858-0106.
SES is proud to continue its support to the AMRDEC and PIF which first began in 2002 as part of the original PIF contract award providing rapid response hardware solutions to the Warfighter in theater. SES support to the AMRDEC PIF contract has continued unabated for each of the past 16 years. This contract award to DSS is indicative of high quality products produced by a highly skilled, dedicated and professional workforce, committed to supporting our men and women in uniform. For more information about SES visit www.ses-i.com.
Logistics Support Facility (LSF)
SES was awarded a competitive Indefinite Delivery Indefinite Quantity (IDIQ) Contract to serve as the Prime Contractor in support of the Logistics Support Facility Management Activity (LSFMA), Redstone Arsenal I Huntsville, Alabama. The point of contact is George Kunkle (256) 258-0500.
U.S. Navy APSD
The Navy Aircraft Prototype Systems Division (APSD) MA/IDIQ contract was Competitively Awarded to SES in September 2017 with a 5-Year POP. SES is a prime contractor on both Lot 1 (Large Business) and Lot 2 (Small Business). The primary mission of APSD is to support warfighter needs through the use of innovative and rapid prototyping solutions with the ability to produce limited quantities to support test, evaluation and initial fielding requirements. Platforms include, but are not be limited to C-130, H-53, P-3, P-8, E-2, V-22, MQ-8, MQ-4, Unmanned Air Vehicles of many varieties and a variety of mobile ground mission systems.
NAWCAD FRP MACU.S. Navy NAWCAD Full Rate Production Multiple Award Contract
• Contract provides: full rate production of mission system avionics upgrade/mod kits, components, and installation of these products.
• The Naval Air Warfare Center Aircraft Division (NAWCAD Full Rate Production Multiple Award contract was awarded in April 2020 with a 5- year POP with Options for 5 additional years.
• Competitively Awarded . Lot 2: Unrestricted Category. Lot 2: Small Business. Employs government and contractor facilities
• SES is a prime contractor on both Lot 2 and Lot 3.
• The scope of this contract vehicle supports aviation platforms operated under Military/Commercial, and/or FAA rules and regulations, to include fixed wing, rotary wing, UAV, lighter than air vehicles, as well as related mission and weapon systems.
U.S. Navy NAWCAD KRACEn Contract
• Contract provides for aircraft Kits, Recovery, Augmentation, Components, and Engines (KRACEn)
• The Naval Air Warfare Center Aircraft Division (NAWCAD KRACEn contract was awarded in April 2020 with a 5-year POP with Options that could increase the POP to 10 years.
• Competitively Awarded. Employs government and contractor facilities
• SES is a prime contractor.
• KRACEn is a multiple-award, indefinite-delivery/indefinite-quantity contract covering modification kit build and installations, repair of aircraft and components, engine overhaul, recovery of downed aircraft and augmentation labor supplement for maintenance. The contract also seeks to offer assistance to single satellite site and organizational-level contractor logistics requirements in support of Navy Fleet Readiness.
Our SES Purchasing Department is fully compliant with all Public Laws and government Federal Acquisition Regulations (FAR) and is capable of supporting all types of federal and commercial procurements. SES’ Purchasing Department has successfully completed a Contractor Purchasing System Review (CPSR) audit and has a Government Approved Purchasing System as recommended by the Defense Contract Management Agency (DCMA).
We have a staff of highly qualified acquisition/procurement professionals who are committed to the highest standards of ethics and business conduct with the primary focus on the warfighter. SES procures a wide range of items such as raw materials, fabricated piece parts, mechanical and electrical components, integrated subsystems and other hardware required to support program completion. The SES terms and conditions to becoming an approved SES supplier are found online in our Doing Business page.
SES is able to meet the high expectations of our Government customers for modifications and other Lifecycle Sustainment requirements on both tracked and wheeled systems/subsystems/components. SES offers design, engineering, technical data development, prototyping, integration, fabrication of both electrical and mechanical elements, technical manuals to include NMWRs/DMWRs, level of repair analysis, provisioning, training development/support, inventory control points, and total package fielding. SES also supports maintenance, repair, and overhaul requirements. SES is a turn-key capable company for your Modification and Life Cycle Sustainment needs.
The Integrated Logistics Support (ILS) performs specialized research and documentation development tasks in support of SES’s program achievement. Originating directly from work performed by SES and interfacing with a variety of data sources and data bases, ILS is responsible for ensuring complete and accurate documentation of all parts, part numbers, components and materials as well as their sources. Coordinates all aspects of the provisioning process and applicable Technical Manuals with representatives from Contract Administration, Program Management, Engineering, Materials and Manufacturing. Technical liaison with customers, military agencies and subcontractors.
SES’s ILS function is responsible for the production of all requisite program documentation for end user maintenance and repair staffs. The materials are produced by ILS as required under contract performance specifications and provide step by step instruction, illustrated diagrams/schematics and parts sourcing information for field personnel responsible for the ongoing maintenance and repair of existing equipment and systems which have been built, installed, upgraded, or modified by SES. The documentation and supporting materials produced within the ILS department varies widely in technical complexity and scope, but in all cases is subject to extraordinarily high standards of accuracy, completeness and timeliness as established by regulations, contracting documents, internal quality assurance specifications and production management.